About us|News|Products|Banks|Contact
Japan Spanish English
Hexagonal Wire Netting
Gabion
Reinforced gabions
Heavy hexagonal wire netting
Galvanized gabion
PVC Coated Gabions
Zinc-aluminum alloy gabion
Stainless steel gabions
Gabions
gabions baskets
Welded Gabion box
Gabion box
Reno Mattress
Sack Gabions
Rockfall nettings
Gabion terramesh
Green terramesh
Gabions with geotextiles
Slope type gabions
Installation of gabions
Installation of reno mattresses
Installation of sack gabions
Installation of Gabion box
Application of gabions
Water Conservancy
Gabion retaining wall
Bridge Protection system
Gabions for channel linings
Revetment gabions
Gabion rockfall embankment protection
Gabion Mesh Machine
Welded Gabions
Garden Gabion
Welded gabions
Chainlink mesh gabions
SNS flexible protection mesh
Gabions: You are here: Home - products
Contact us for a quotation.
Sales Manager E-mail: gabion@gabionmesh.com
Sack Gabions

Sack gabions are cylindrical baskets made of 8x10 double twisted steel woven wire mesh, with mechanical characteristics higher than the ones suggested from EN 10223-3
Sack gabions are filled with stones at the project site to form flexible and permeable structures used in river trainings and various emergency works. Sack gabions are supplied with steel reinforcing wires inserted during the manufacturing process to facilitate closing during installation. The steel wire used in the manufacture of the sack gabion is heavily galvanized soft temper steel. In order to reinforce the structure, all mesh panel edges are selvedged with a wire having a greater diameter.
Wire
All tests on wire of sack gabions must be performed prior to manufacturing the mesh.
(1)Tensile strength: the wire used for the manufacture of gabions shall have a tensile strength between 380-550N/mm2 exceeding, in order to increase the tensile resistance of the finished products, what is suggested from EN10223-3. Wire tolerances are in accordance with EN 10218.
(2)Elongation: Elongation shall not be less than 10%, according to EN 10223-3.Test must be carried out on a sample at least 25 cm long.
(3)Zinc coating: minimum quantities of zinc shown at Table 4 meet the requirements of EN 10244-2
(4) Adhesion of zinc: the adhesion of the zinc coating  to the wire shall be such that, when the wire is wrapped six turns around a mandrel having four times the diameter of the wire, it does not flake or crack when rubbing it with the bare fingers.

Message
Company Name: *
Address:
Postcode:
Contactor: *
Telephone: *
Fax:
Product Name :
E-mail: *
Content:
*
|||||||
All HeShuoMetalProducts Co.,Ltd. TEL:86-311-86987533 FAX:86-311-86986623 Email:gabion@gabionmesh.com