About us|News|Products|Banks|Contact
Japan Spanish English
Hexagonal Wire Netting
Reinforced gabions
Heavy hexagonal wire netting
Galvanized gabion
PVC Coated Gabions
Zinc-aluminum alloy gabion
Stainless steel gabions
gabions baskets
Welded Gabion box
Gabion box
Reno Mattress
Sack Gabions
Rockfall nettings
Gabion terramesh
Green terramesh
Gabions with geotextiles
Slope type gabions
Installation of gabions
Installation of reno mattresses
Installation of sack gabions
Installation of Gabion box
Application of gabions
Water Conservancy
Gabion retaining wall
Bridge Protection system
Gabions for channel linings
Revetment gabions
Gabion rockfall embankment protection
Gabion Mesh Machine
Welded Gabions
Garden Gabion
Welded gabions
Chainlink mesh gabions
SNS flexible protection mesh
Knowledge: You are here: Home - News

Gabion Stone

Stone for pitching shall be granite or other clean, hard dense and durable rock free from cracks, kaolinised patches, organic or other impurities.

The dimension of each stone measured perpendicular to the face of the pitching shall not be less than 225mm. The exposed face of each stone shall not be less than 0.02m2 in area.

Stone shall be hand placed with closed joints on a layer of gravel or crushed stone to a minimum finished thickness of 25mm or according to customer's requirements.

The sides of stones shall be roughly trimmed with a spalling hammer to obtain a reasonably close fit and the interstices filled with clean coarse aggregate or gravel well rammed and wedged with spalls. The finished pitching shall show an even surface to the lines and levels or according to customer's requirements.

The joints in pitching should be raked out to a depth of at least 50mm and sealed with 1:2 cement/sand mortar finished neatly flushed with the surrounding stones. The stones shall be left clean of all mortar and stains.

Measurement of pitching shall be made by the square meter of surface pitched on otherwise stated in the Bill of Quantities. The rates for pitching shall apply whether the surface to be pitched is level or inclined.

All HeShuoMetalProducts Co.,Ltd. TEL:86-311-86987533 FAX:86-311-86986623 Email:gabion@gabionmesh.com